Safran SecureSync 2400 - Option Cards Overview

To visually identify a connector type, see "Option Card Connectors" on page23.
1.5.1 Option Cards Overview
The table below lists all SecureSync option cards available at the time of pub-
lication of this document, sorted by their function.
The table column (see table below) WebUI Name refers to the names under
which the cards installed in a SecureSync unit are listed in the INTERFACES >
OPTION CARDS drop-down menu.
Detailed specifications and configuration assistance for every card can be found
in the APPENDIX. To quickly access the APPENDIX topic for your option card(s),
you may use the hyperlinks in table "Option cards listed by their ID number" on
page21.
Note: * Every option card has a unique 2-digit ID number located on
its cover plate, and in the center column of the table below. The com-
plete Safran Part Number for option cards is 1204-xx (e.g., 1204-18).
Table 1-4: Option cards identification
Function Web UI Name Illustration ID* Inputs Outputs Conn.'s
Time and Frequency Cards
Quad 1PPS
out (TTL)
1PPS Out BNC
18
0 1PPS, TTL
(4x)
BNC
(4x)
Quad 1PPS
out (10 V)
1PPS Out 10V
19
0 1PPS, 10 V
(4x)
BNC
(4x)
Quad 1PPS
out (RS-
485)
1PPS Out, RS-
485
21
0 1PPS, RS-
485 (4x)
Terminal
block,
10-pin
Quad 1PPS
out (fiber
optic)
1PPS Out, Fiber
2B
0 1PPS, F/O
(4x)
ST Fiber
optic
(4x)
1in/3out
1PPS (TTL
[BNC])
1PPS/Fre-
quency RS-485
28
1PPS (1x) 1PPS (3x) BNC
(4x)
1in/2out
1PPS/freq
(fiber
optic)
1PPS In/Out,
Fiber
2A
1PPS (1x) 1PPS (2) ST Fiber
optic
(3x)
5MHz out 5MHz Out
08
0 5MHz (3x) BNC
(3x)
1.5 Option Cards
CHAPTER 1 • SecureSync 2400 User Manual Rev. 5.2
17