Safran SecureSync 2400 - Endrun Formats; Endrun Time Format

A configuration of Time Transfer as Message Format1 and Current Status as
Format2 causes the SINCGARS protocol to be emulated and the machine state
to be initializated.
Format1: Time Transfer (5101)
Format2: Current Status (5040)
Format3: Buffer Box (253)
A configuration of Current Status as Message Format1 and Time Transfer as
Format2 results in broadcasting of the messages Current Status (1Hz), Time
Transfer (1Hz), and Buffer Box (1/6Hz) at their default rates.
Format1: Current Status (5040)
Format2: Time Transfer (5101)
Format3: Buffer Box (253)
5.4.16 EndRun Formats
The following formats provide compatibility with EndRun technology.
5.4.16.1 EndRun Time Format
E x a m p l e m e s s a g e :
T YYYY DDD HH:MM:SS zZZ m<CR><LF>
Where:
T Time Figure of Merit character (TFOM), limited to the range 6
to 9:
9 indicates error >±10 milliseconds, or unsynchronized con-
dition
8 indicates error <±10 milliseconds
7 indicates error <±1 millisecond
6 indicates error <±100 microseconds
YYYY Year
DDD Day of Year (001-366)
HH Hour of the day (00-23)
: Colon Separator
SecureSync 2400 User Manual 585
APPENDIX