Dual 1 Gb NTP Server [-49]: Specifications
Inputs/Outputs: (2) Gigabit Ethernet
Connectors: SFP Ports (2x)
Management: Enabled or Disabled (NTP server only)
Maximum Number of Cards: 1
Ordering Information: 1204-49: Dual Gigabit Ethernet
Figure 5-55: 1204-49 option card rear plate
Hardware
Cards in this category have SFP interface(s) that accept any number of brands
chosen by the user.
Safran has successfully tested the following SFP models with the Gb Networking
cards:
Bel SFP-1GBT-05 (available from Safran as SFP-COPPER)
Avago AFBR-5710LZ (available from Safran as SFP-FIBER-MM)
Finisar FTLF1318P3BTL (available from Safran as SFP-FIBER-SM)
The following SFP models are NOT approved for use with cards of this type
(found to be incompatible in testing):
Arista SFP-1G-T
Networking
To configure the network information on this set of cards, navigate to
MANAGEMENT > Network Setup.
In the Actions Panel, select Configure xxxx 1GBE (Slot x).
In the xxxx 1GBE (Slot x) Network Status window, each of your Ethernet ports will
be listed, along with their status.
496 SecureSync 2400 User Manual
APPENDIX
To Next Page
Loading...
