To add a user account:
1.
Enter a Username. (For rules, see "Rules for Usernames" on page275.)
2.
Enter a Password. The password requirements are configurable, see
"Managing Passwords" on the next page. By default a password can be any
combination of upper- and lower-case characters. Minimum password
length = 8 characters, maximum length = 32 characters.
3.
Repeat the new Password.
4.
In the Group field, choose the permission group to which you want the user
to belong to: user or admin. The user permission level assigns permission
to access and change all settings, with the following exceptions that are lim-
ited to the admin accounts:
Changing network settings
Adding and deleting user accounts
Web Interface Settings
Upgrading SecureSync system software
Resetting the SecureSync configuration
Clearing log files
Changing Disciplining Setup options
Changing configuration options for the following protocols or fea-
tures:
NTP
HTTPS, SSH
LDAP/RADIUS
SNMP (with the exception of configuring SNMP notifications).
4.3 Managing Users and Security
CHAPTER 4 • SecureSync 2400 User Manual Rev. 5.2
277
To Next Page
Loading...
