Safran SecureSync 2400 - Page 320

System Status panel
Reference—Indicates the status of the current synchronizing reference, if
any.
Power—Indicates whether the power is on.
Status—Indicates the status of the network’s timing. There are three indic-
ators in the Status field:
Sync—Indicates whether SecureSync is synchronized to its selected
input references.
Green indicates SecureSync is currently synchronized to its ref-
erences.
Orange indicates SecureSync is not currently synchronized to
its references.
Hold—When lit, SecureSync is in Holdover mode.
Fault—Indicates a fault in the operation of the SecureSync. See
"Troubleshooting via Web UI Status Page" on page354 for instruc-
tions for troubleshooting faults.
Alarm Status: If a major or minor alarm is present, it will be displayed here.
NTP—Current STRATUM status of this SecureSync unit.
Temperature—The current board temperature will be displayed here.
304
CHAPTER 4 • SecureSync 2400 User Manual Rev. 5.2
4.5 Quality Management