Safran SecureSync 2400 - Page 461

The Edit window allows the configuration of the following settings:
Format: Sets the formatting of the IRIG input signal, as defined by the IRIG
generator time source. The available choices are:
IRIG A
IRIG B
IRIG G
NASA-36
Modulation Type: Configures the type of input signal modulation. The
choices are:
IRIG DCLS—A TTL (Phase) modulated signal.
IRIG AM—An amplitude modulated signal.
Frequency: The IRIG modulation frequency. This is determined by the con-
figuration of Format and Modulation Type. See "IRIG Carrier Frequencies"
on page588 for details.
SecureSync 2400 User Manual 445
APPENDIX