Safran SecureSync 2400 - Page 556

Note: If you have only one input or output of any type, NetClock will
number that input or output 0. Additional inputs or outputs will be
numbered 1 or above.
The Edit window offers the following configuration fields:
Format Group: Determines the time code message format category (see
also "Time Code Data Formats" on page560). Choices are:
None
NENA-Spectracom (Formats 0, 1, 2, 3, 4, 7, 8, 9, 1S)
NMEA (GGA, RMC, ZDA message)
BBC (Formats 1, 2, 3PSTN, 4, 5RMC)
ICD-153 (Buffer Box, Time Transfer, Current Status)
EndRun (EndRun Time Format, Endrun X Format)
540 SecureSync 2400 User Manual
APPENDIX