Siemens SINUMERIK 840D

Setting up the machine
2.9 Displaying setting data lists
Milling
110 Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
2.9 Displaying setting data lists
You can display lists with configured setting data.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Procedure
1. Select the "Parameter" operating area.
2. Press "Setting data" and "Data lists" softkeys.
The "Setting data list" window opens.
3. Press the "Select data list" softkey and in the "View" list, select the
required list with setting data.