Alarms, error messages, and system alarms
20.4 PLC and NC variables
Milling
582 Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
Proceed as follows
1. Select the "Diagnosis" operating area.
2. Press the "Messages" softkey.
The "Messages" window appears.
20.4 PLC and NC variables
20.4.1 Displaying and editing PLC and NC variables
The "NC/PLC variables" window allows NC system variables and PLC variables to be
monitored and changed.
You receive the following list in which you can enter the desired NC/PLC variables in order to
display the actual values.
● Variable
Address for NC/PLC variable
Incorrect variables have a red background and are displayed with a # character in the
value column.
● Comment
Any comment on the variable.
The columns can be displayed and hidden.
● Format
Specify the format in which the variable is to be displayed.
The format can be specified (e.g. floating point)
● Value
Displays the actual value of the NC/PLC variables
To Next Page
Loading...
Need help?
General
