Program management
13.12 Backing up data
Milling
522 Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
13.12.3 Reading in an archive
If you want to read in a specific archive, you can select this directly from the data tree.
Procedure
1. Select the "Start-up" operating area.
2. Press the "System data" softkey.
3. Below the "Archive" directory in the data tree, select the file you
want to read in.
4. Press the "Read in" softkey.
...
5. Press the "OK" or "Overwrite all" softkey to overwrite existing
files.
- OR -
Press the "Do not overwrite" softkey if you do not want to
overwrite already existing files.
- OR -
Press the "Skip" softkey if the read-in operation is to be
continued with the next file.
The "Read In Archive" window opens and a progress message
box appears for the read-in process.
You will then obtain a "Read error log for archive" in which the
skipped or overwritten files are listed.
6. Press the "Cancel" softkey to cancel the read-in process.
To Next Page
Loading...
Need help?
General
