Alarms, error messages, and system alarms
20.6 Logbook
Milling
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
591
20.6.2 Making/searching for a logbook entry
Using the "New logbook entry" window to make a new entry into the logbook.
Enter your name, company and department and a brief description of the measure taken or a
description of the fault.
Note
If you wish to make line breaks in the "fault diagnostics/measure" field, use the key
combination <ALT> + <INPUT>.
The date and entry number are automatically added.
Sorting the entries
The logbook entries are displayed numbered in the "machine logbook" window.
More recent entries are always added at the top in the display.
Procedure
1. The logbook is opened.
2. Press the "New entry" softkey.
The "New logbook entry" window opens.
3. Enter the required data and press the "OK" softkey.
You return to the "Machine logbook" window and the entry is
displayed below the machine identity data.
Note
Once you have stored an entry this can no longer be changed or deleted.
Searching for a logbook entry
You have the option for searching for specific entries using the search function.
1. The "Machine logbook" window is opened.
2. Press the "Search..." softkey and enter the desired term in the search
form. You can make a search according to date/time, company
name/department or according to fault diagnostics/measure.
The cursor is positioned on the first entry that corresponds to the
search term.
3. Press the "Continue search" softkey if the entry found is not the one
that you are looking for.
To Next Page
Loading...
Need help?
General
