Siemens SINUMERIK 840D

Machining the workpiece
4.11 Displaying G Functions and Auxiliary Functions
Milling
168 Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
Procedure
1. Select the "Machine" operating area.
2. Press the <AUTO>, <MDA> or <JOG> key.
3. Press the menu forward key and the "Synchron." softkey.
The "Synchronized Actions" window appears.
You obtain a display of all activated synchronized actions.
4. Press the "ID" softkey if you wish to hide the modal synchronized
actions in the automatic mode.
- AND / OR -
Press the "IDS" softkey if you wish to hide static synchronized actions.
- AND / OR -
Press the "Blockwise" softkey if you wish to hide the non-modal
synchronized actions in the automatic mode.
...
5. Press the "ID", "IDS" or "Blockwise" softkeys to re-display the
corresponding synchronized actions.