TECO A510s - Page 212

4-134
Value
Function
Description
Control mode
Name LCD Display V/F
V
/F+P
G
SLV SV
PM
SV
PM
SL
V
SL
V
2
62
EPS function EPS Input ON:EPS input
X X X O O X X
03-0X =00: 2-wire control: forward operation
03-0X =01: 2-wire control: reverse operation. Refer to the 2-wire operation mode in Figure 4.4.1.
03-0X =02: Multi-speed/position setting command 1.
03-0X =03: Multi-speed/position setting command 2.
03-0X =04: Multi-speed/position setting command 3.
03-0X =05: Multi-speed/position setting command 4 (setting =05).
Select frequency reference using multi-function digital input.
In SV or PMSV mode (00-00=3, 4), with 03-00~07 set to 51, multi-speed command can be used to select multiple
segment positions.
03-0X =29: Jog frequency selection (setting =29). Select frequency reference using the multi-function digital input.
In SV or PMSV mode (00-00=3, 4), with 03-00~07 set to 51, multi-speed command can be used to select multiple
segment positions.