TECO A510s - Page 228

4-150
Setting
Function
Contents
Control mode
Name LCD display V/F
V/F
+
PG
SLV SV
PM
SV
PM
SLV
SLV
2
23
Source of
operation
command
Run Cmd
Status
ON: operation command from LED digital
operator (local mode)
O O O O O O O
24
Source of
reference
command
Freq Ref Status
ON: reference frequency from LED digital
operator (local mode)
O O O O O O O
25
Low torque
detected
Under Torque ON: Low-torque detection is ON O O O O O O O
26
Frequency
reference
missing
Ref. Loss. ON: Reference frequency loss O O O O O O O
27
Timing function
output
Time Output
Set time function parameter to 03-33 and
03-34，and the time function input is set by
parameter from 03-00 and 03-07
O O O O O O O
28
Traverse
operation UP
Status
Traverse UP
ON: in acceleration period (when the
wobbling is in operating )
O O X X X X O
29
During
Traverse
operation
status
During
Traverse
ON: In the period of frequency wobbling
operation (when the wobbling is in
operating )
O O X X X X O
30 Select motor 2
Motor 2
Selection
ON: Switch to motor 2 O O O O O O O
31
Zero Speed
Servo Status
(Position
Mode)
Zero Servo ON: Zero servo function is active X X X O O X X
32
Communicatio
n control
contacts
Control From
Communication
ON: Communication control contacts
(location:2507H).
O O O O O O O
33 Reserved
Invalid Do
Func.
Reserved - - - - - - -
34 Reserved
Invalid Do
Func.
Reserved - - - - - - -
35 Reserved
Invalid Do
Func.
Reserved - - - - - - -
36 Reserved
Invalid Do
Func.
Reserved - - - - - - -
37
PID Feedback
Loss Detection
Output
PID Fbk Loss ON: PID Feedback Loss O O O O O O O
38 Break Release Brake Release ON: Release Brake X X O O O X X
39
Frequency
Detection 1
(dedicated for
Crane)
Freq. Detect 1
(Dedicated
crane)
ON: Output frequency > 03-13，
Hysteresis range : 03-14
OO O X XXX
40
Frequency
Output
Frequency
output Ing
ON: Inverter status is at DC brake, Base
Block or stop.
XX X O XXX
42 Reserved
Invalid Do
Func.
Reserved - - - - - - -
43 Reserved
Invalid Do
Func.
Reserved - - - - - - -
44 Reserved
Invalid Do
Func.
Reserved - - - - - - -