TECO A510s - Page 259

4-181
04-11 AO1 function Setting
Range
0:
Output frequency
1: Frequency command
2: Output voltage
3: DC voltage
4: Output current
5:
Output power
6: Motor speed
7: Output power factor
8: AI1 input
9: AI2 input
10:
Torque command
11: q -axis current
12: d-axis current
13: Speed deviation
14: Reserved
15:
ASR output
16: Reserved
17: q-axis voltage
18: d-axis voltage
19~20: Reserved
21:
PID input
22: PID output
23: PID target value
24: PID feedback value
25:
Output frequency of the soft starter
26: PG feedback
27: PG compensation amount
04-12 AO1 gain
Range
0.0~1000.0%
04-13 AO1 bias
Range
-100.0~100.0%
04-16 AO2 function Setting
Range
See parameter 04-11
04-17 AO2 gain
Range
0.0~1000.0%
04-18 AO2 bias
Range
-100.0~100.0%
For the analog output and related parameters, refer to figure 4.4.50.