TECO A510s - Page 60

3-45
The following table shows maximum output frequency for each control mode.
Duty Cycle Control mode Other settings Maximum output frequency
Heavy Duty
(00-27=0)
V/F
V/F + PG
SLV2
maximum frequency set to
599Hz
599Hz
SLV
200V 1~10HP, 400V 1~15HP 150Hz
200V 15~25HP, 400V 20HP 110Hz
400V 25~30HP 100Hz
200V 30~150HP, 400V
40~425HP, carrier (11-01) is
set as 8K or below 8K
100Hz
200V 30~100HP, 400V
40~175HP, carrier (11-01) is
above 8K
80Hz
SV unlimited 400Hz
PMSV unlimited
Twice of Base frequency
PMSLV unlimited
Base frequency
Normal Duty
(00-27=1)
V/F
V/F + PG
maximum frequency set to
599Hz
599Hz