Vector VEC-VA Series User Manual

VA Motion Controller Programming Manual
10
II Features of the Software and Hardware
Requirements
The manual describes how to use the programming software--MULTIPROG Express5.51.
Users can write your own programs on the Vector motion controller according to this manual.
2.1 Basic Knowledge Required
Users who are familiar with this manual need to have general knowledge of automation
technology, understand the Windows operating system, and have read the “Vector VA Motion
Controller Programming Manual”.
2.2 MULTIPROG Express5.51 Features
 Support IEC61131-3 programming languages   --FBD, LD, IL, ST and SFC.
 Clear project structure, intuitive programming language.
 Support cross-compilation between FBD, LDAnd IL. Support mixed programming.
 Multi-user programming, shorten the project programming time.
 Guide, cross references and other resources can be efficiently programmed.
 Compatible version can be centrally managed.
2.3 Computer Hardware Requirements
device
lowest
recommend
CPU
500MHz
1GHz
RAM
256MB
1GB
hard disk
500MB
1GB
Monitor
1024 × 768
operating
WindowsXP Pro, 2000, Vista, Win7, Win8, Win10, IE5.0 above
communicati
TCP / IP, RS232
2.4 MULTIPROG Express5.51 Support
content
Quantity
Project node in the tree
8000
Configuration / Resource engineering tree
1/1
Each instance of the program resources
1000
Each resource tasks
1

Vector VEC-VA Series Specifications

General

Brand	Vector
Model	VEC-VA Series
Category	Controller
Language	English