VA Motion Controller Programming Manual
91
8 .2 variable monitor window
The Variable Watch window is a powerful tool that allows users to easily insert different
variables into a list and observe their runtime behavior. Once a variable is added to the watch
window, its current value can be monitored without having to open the corresponding work
order. Users can focus on debugging and observing the variables that need to change . If this is not
the case, please work
Single switch to the online mode, by pressing it to " Debug on / off " FIG subscript
to. Right-click inside the work order and select " Open Watch Window " from the upper and
lower menus or click the watch window button on the toolbar , in the ladder diagram, or in the
variable worksheet, select the variable to be monitored right click "Add to Watch window" as
shown
To Next Page
Loading...
