Vector VEC-VA Series User Manual

VA Motion Controller Programming Manual
288
1) After the zero drift adjustment is completed, it is determined that the Enable state on the
module is False, and the state of the parameter Enable is not allowed to be "TRUE" during the
execution of the program by the "NS_CC_DAC module" and the "MC_Power module", otherwise
the function module is run. The motor will run on a meal.
2) The examples described below will all be the default example after the zero drift has been
adjusted. The following program demonstration will not repeat the description.

Vector VEC-VA Series Specifications

General

Brand	Vector
Model	VEC-VA Series
Category	Controller
Language	English