VA Motion Controller Programming Manual
325
When Abs_Ex0 a FALSE to TRUE, the first MC_MoveAbsolute instruction starts
execution, the current position of the axis at this time is 1000, the target location 3000.
When the shaft position is reached 20000, Abs_Ex1 a FALSE to TRUE,
MC_MoveAbsolute second instruction begins execution, and the execution of the first
instruction MC_MoveAbsolute is interrupted, the output parameter Abs1_Abt becomes
TRUE.
Position when the shaft reaches 60,000, the second MC_MoveAbsolute instructions
are executed, the output parameter Abs2_Done becomes TRUE.
To Next Page
Loading...
