Vector VEC-VA Series User Manual

VA Motion Controller Programming Manual
348
 When Vel_Ex0Becomes TRUEAfter time, a period Vel_BsyAnd Vel_Act
becomes TRUEAfter axis starts forward rotation, the output reaches the set speed
Invelocity TRUEAnd then SetOv_EnSet TRUEWhile Enbaled, SetOv_BsyBecomes
TRUE, MC_SetOverride effective date of the controlled axis according VelFactorThe
value of re-generate the target speed.
 When SetOv_EnBecomes FALSEWhen, VelFactor = 100 corresponds to the
deceleration target speed.
 MC_SetOverride modified during execution of instructions VelFactorValues,
VelFactorValue takes effect immediately, the target speed command MC_MoveVelocity
will change accordingly.

Vector VEC-VA Series Specifications

General

Brand	Vector
Model	VEC-VA Series
Category	Controller
Language	English