Vector VEC-VA Series User Manual

VA Motion Controller Programming Manual
364
movement.
 ActualPosition is 3000, MC_SetPosition instruction execution, since instructions
MC_SetPosition selected as the absolute position, therefore, performed after the completion
of ActualPosition = 0, ActualPosition MC_MoveRelativel instruction is complete when the
7,000.
 As can be seen by the speed command MC_SetPosition curve image above does
not affect the movement is performed, but it reflects MC_RealActualPosition ActualPosition
curve value read ActualPosition affected MC_SetPosition instructions.

Vector VEC-VA Series Specifications

General

Brand	Vector
Model	VEC-VA Series
Category	Controller
Language	English