Vector VEC-VA Series User Manual

VA Motion Controller Programming Manual
486
 FIG output timing parameters
Case 1: When the Execute FALSE to TRUE, while Done becomes TRUE, and if the time
Execute to FALSE, FALSE becomes Done
 Function Description:
This instruction is used to change the point of entry into force of the cam. First instruction
using MC_CamWritePoint electronic cam cam point information table corresponding write, and
execute instructions MC_CamSet, the change takes effect cam point information.
MC_CamSet instruction execution, the cam curve after the changes take effect immediately.

Vector VEC-VA Series Specifications

General

Brand	Vector
Model	VEC-VA Series
Category	Controller
Language	English