Vector VEC-VA Series User Manual

VA Motion Controller Programming Manual
489
tappet
Status7
(Tappet state point 7)
State TappetNum7
specified number of points
tappet
BOOL
TRUE or FALSE
Status8
(8 tappet point state)
State TappetNum8
specified number of points
tappet
BOOL
TRUE or FALSE

Function Description
This instruction is used to read the state of eight points of the tappet. Each tappet point state
spindle through the forward or reverse state point of the tappet, the tappet of each state point is
determined by the setting of each lifter point. The status of each point in the tappet end of the cam
shaft through the forward or backward through the cam start point to FALSE.

Vector VEC-VA Series Specifications

General

Brand	Vector
Model	VEC-VA Series
Category	Controller
Language	English