2-22
IM 701210-05E
2.3 Setting the Trigger
Edge on A Trigger
A trigger is activated when an edge trigger is detected on any of the channels set to
edge trigger while condition A is true.
A
True
Trigger
Edge
detection
Condition A
CH1 to CH16
L: Low level
H: High level
X: Don’t care
Condition
True: While all channels match
in the preset pattern
False: While all channels do not
match the preset pattern
LogicA/LogicB
Disable: Do not use logic input
Enable: Use logic input
: Rising edge
: Falling edge
: Don’t care
OR Trigger
A trigger is activated when any of the channels set to edge trigger meets the condition.
For example, a trigger can be activated on the rising edge of CH1 or CH2.
LogicA/LogicB
Disable: Do not use logic input
Enable: Use logic input
: Rising edge
: Falling edge
: Don’t care
CH1 to CH16, DSP1 to DSP6 (optional)
To Next Page
Loading...
