18-11
IM 701210-06E
Troubleshooting, Maintenance, and Inspection
18
18.2 Messages and Corrective Actions
Network Errors (1300 to 1399)
Code Message and Corrective Action Section
1300 Cannot connect with ftp server. Confirm the network settings and connection. Chapter 16
1301 Has not connect with ftp server yet. Confirm the network settings and connection. Chapter 16
1302 This ftp function in not supported. Chapter 16
1303 FTP Error: Pwd Chapter 16
Confirm the network settings and connection.
1304 FTP Error: Cwd Chapter 16
Confirm the network settings and connection.
1305 FTP Error: Rm Chapter 16
Confirm the network settings and connection.
1306 FTP Error: List Chapter 16
Confirm the network settings and connection.
1307 FTP Error: Mkdir Chapter 16
Confirm the network settings and connection.
1308 FTP Error: Rmdir Chapter 16
Confirm the network settings and connection.
1309 FTP Error: Get Chapter 16
Confirm the network settings and connection.
1310 FTP Error: Put Chapter 16
Confirm the network settings and connection.
1311 FTP Error: GetData Chapter 16
Confirm the network settings and connection.
1312 FTP Error: PutData Chapter 16
Confirm the network settings, connection, and disk capacity.
1313 FTP Error: AppendDataa Chapter 16
Confirm the network settings, connection, and disk capacity.
1314 FTP Error: Client Handle Chapter 16
Confirm the network settings and connection.
1315 FTP Error: Others Chapter 16
Confirm the network settings and connection.
1335 Cannot send data to a network printer. Confirm the network settings and connection. 12.4, 16.4
1336 Cannot send a mail. Confirm the network settings and connection. 16.5
1345 Test Error. Chapter 16
1346 Test Success. Chapter 16
1348 Failed to initialize network. Chapter 16
Confirm the network settings.
1349 The password entered the first time is different from the password entered the second time. Chapter 16
Reenter the password for the second time.
1350 Failed to acquire time from SNTP server. 16.8
Confirm the network settings and connection.
1500 Cannot set when source channel is not a Volt Input. Chapter 15
1501 Changed the network information. Chapter 16
To apply the changes, power-cycle the DL750/DL750P.
1502 Executed the firmware overwriting of the frequency module. Chapter 16
1503 Overwriting firmware of the frequency module... Chapter 16
1505 Executed the firmware overwriting of the built-in printer. 18.4
1506 Overwriting the printer firmware... –
1600 This function can be used only when the recorder mode is Off. Chapter 9
1601 Can be specified only when the recorder mode is Off. Chapter 9
1602 Can be configured only when the recorder mode is Off. Chapter 9
Print from the Reprint menu.
1603 This function cannot be used when the recorder mode is set to X-Y. 9.7
1604 Cannot be configured or executed when the recorder mode is Off. Chapter 9
To Next Page
Loading...
Need help?
General
