1 689 989 067 2017-12-08| Robert Bosch GmbH
36 | EPS 708 | en
6. Maintenance 53
6.1 Servicing 53
6.2 Maintenance intervals 53
6.3 Checking the high-pressure hose 54
6.4 Checking hoses 54
6.5 Changing calibrating oil,
cleaning thecalibrating oil tank 54
6.5.1 Changing the calibrating oil 54
6.5.2 Draining dirty oil in the stowage space
of the work area 54
6.6 Replacing the intake filter
(test oil filter and fine filter)
and the test oil filter (cooling) 55
6.6.1 Replacing the test oil filter (cooling) 55
6.6.2 Replacing the intake filter (fine filter) 56
6.7 Replacing the high-pressure rail filter
(main rail) 57
6.8 Replacing filters in the hydraulics area 58
6.8.1 Replacing the volume meter filter 58
6.8.2 Replacing the flow meter filter element 59
6.8.3 Changing the pump return filter
element 59
6.9 Replacing the inlet filter cartridge
(e.g. Injector A) 59
6.10 Lubricating oil supply maintenance 60
6.10.1 Changing lubricating oil 60
6.10.2 Replacing the lubricating oil filter 61
6.11 Protective plates of the protective hood 62
6.12 Cleaning the chiller 62
6.13 Replacing filter mats 62
6.14 Spare and wearing parts 62
7. Decommissioning 63
7.1 Temporary shutdown 63
7.2 Change of location 63
7.3 Disposal and scrapping 63
7.3.1 Substances hazardous to water 63
7.3.2 EPS 708 and accessories 63
7.3.3 Chiller 63
8. Tightening torques 64
8.1 Fastening parts 64
8.2 Coupling halves 64
8.3 Drive coupling 64
8.3.1 Drive coupling 1 686 401 024 64
8.3.2 Tightening torques for clamping screws 64
8.4 Permitted coupling torques 64
9. Technical data 65
9.1 EPS 708 65
9.2 Noise emissions 65
9.3 Dimensions and weights 65
9.4 Pressure and filling quantities 65
9.5 Test bench colors 65
To Next Page
Loading...
