Bosch EPS 708 - Contents English

1 689 989 067 2017-12-08| Robert Bosch GmbH
| EPS 708 | 35 en
Contents English
1. Symbols used 37
1.1 In the documentation 37
1.1.1 Warning notices -
Structure and meaning 37
1.1.2 Symbols in this documentation 37
1.2 On the product 37
2. User information 38
2.1 Important notes 38
2.2 Safety instructions 38
2.3 Electromagnetic compatibility (EMC) 38
3. Product description 38
3.1 Proper use 38
3.2 Requirements 39
3.3 Scope of delivery 39
3.4 Special accessories 39
3.5 Description of unit 40
3.5.1 EPS 708 40
3.5.2 EPS 708 test area 41
3.5.3 EPS 708 rear view 42
3.5.4 Calibrating oil supply and chiller
(special accessory,
depending on version) 42
3.5.5 Inlet filters 43
3.5.6 Connecting cable 1 684 463 946
(X24 for common rail pump) 43
3.5.7 High-pressure hose parts set
(special accessory) 43
3.5.8 Lubricating oil supply
(optional accessory) 44
3.6 Installation and initial commissioning 44
4. Operation 45
4.1 Switching on 45
4.2 Switching off 45
4.3 Emergency stop 45
4.3.1 Activating emergency stop 45
4.3.2 Deactivating emergency stop 45
4.4 Protective hood 45
4.5 Clamping the common rail pump 46
4.5.1 Common rail pump
with tapered shaft connection 46
4.5.2 Common rail pump
with Oldham coupling 47
4.6 Connecting the common rail pump 48
5. Testing 49
5.1 Prior to testing 49
5.2 Switching on the EPS 49
5.3 Starting the test 49
5.4 Description of pump test 50
5.5 EPS 708 faults 50
5.5.1 Cleaning the volume meter 51
5.5.2 Venting the volume meter 52