Danfoss VLT series Programming Guide

Value Denition
0 Reserved
1 Segment ID
2 Starting node
3 Ending node
4 Start action
5 End action
6 Default segment
7 Start Position
8 Maximal constant distance
9 Brake length
10 Start velocity
11 Brake distance
64 A0
65 A1
66 A2
67 A3
Table 7.139 Parameter IDs for Flying Stop Segment
Value Denition
0 Reserved
1 Segment ID
2 Starting node
3 Ending node
4 Start action
5 End action
6 Default segment
7 Starting node
Table 7.140 Parameter IDs for Event Segment Container
Value Denition
0 Reserved
1 Segment ID
2 Starting node
3 Ending node
4 Start action
5 End action
6 Default segment
7 Duration
8 Exit condition
9 Movement type
10 Start position
11 Start velocity
12 Distance
13 End velocity
14 End acceleration
64–69 Coes a0–a5
Table 7.141 Parameter IDs for Time Poly Segment with Positions
Servo Drive Parameter Descr...
VLT
®
Integrated Servo Drive ISD
®
510 System
298 Danfoss A/S © 01/2017 All rights reserved. MG36D102
77

Danfoss VLT series Specifications

General

Series	VLT
Category	DC Drives
Output Voltage	0-100% of input voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Overtemperature, Short Circuit, Ground Fault
Communication Interfaces	Profibus, CANopen
Enclosure Rating	IP20, IP21, IP55, IP66
Cooling Method	Forced Air Cooling, Convection Cooling
Control Mode	Sensorless Vector, Closed Loop Vector
Ambient Temperature	-10°C to +50°C (14°F to 122°F)