Configuring System Information 101
Defining SNTP Interfaces
The
SNTP Broadcast Interface Table
contains fields for setting SNTP on different interfaces. To
open the
SNTP Broadcast Interface Table
, click
System
→
SNTP
→
Interfaces Settings
.
The
SNTP Broadcast Interface Table
contains the following fields:
Interface
— Contains an interface list on which SNTP can be enabled.
console> enable
console# configure
Console(config)# sntp server 100.1.1.1 poll key 10
Console# show sntp status
Clock is synchronized, stratum 4, reference is 176.1.1.8
Reference time is AFE2525E.70597B34 (00:10:22.438 PDT Jul 5 1993)
Unicast servers:
Server Preference Status Last response Offset
[mSec]
Delay
[mSec]
--------- ---------- -------- --------------- ------ ------
176.1.1.8 Primary Up AFE252C1.6DBDDFF2 7.33 117.79
176.1.8.179 Secondary Unknown AFE21789.643287C9 8.98 189.19
Anycast server:
Server Preference Status Last response Offset Delay
[mSec] [mSec]
------- ---------- ------- -------------- ----- ------
VLAN 119 Secondary Up 19:53:21.789 PDT
Feb 19 2002
7.19 119.89
Broadcast:
Interface IP address Last response
----------- ----------- ------------------------
176.1.1.8 Primary AFE252C1.6DBDDFF2
176.1.8.179 Secondary AFE21789.643287C9
To Next Page
Loading...
