Dell PowerConnect 5324 - Add a Log Server

116 Configuring System Information
www.dell.com | support.dell.com
Description (0-64 Characters) — The user-defined server description.
Delete Server — Deletes the currently selected server from the Available Servers list, when
selected.
The
Remote Log Server Settings page also contains a severity list. The severity definitions are the
same as the severity definitions in the
Global Log Parameters page.
Sending Logs to a Server:
1 Open the Remote Log Server Settings page.
2 Select a server from the Available Servers drop-down list.
3 Define the fields.
4 Select the log severity in the Severity to Include check boxes.
5 Click Apply Changes .
The log settings are saved, and the device is updated.
Defining a New Server:
1 Open the Remote Log Server Settings page.
2 Click Add.
The Add a Log Server page opens:
Figure 6-33. Add a Log Server