148 Configuring System Information
www.dell.com | support.dell.com
Adding Rules to Access Profile
NOTE: The first rule must be defined to beginning matching traffic to access profiles.
1
Open the
Access Profiles
page
.
2
Click
Add Profile to Rule
.
The
Add An Access Profile Rule
page opens:
Figure 6-53. Add An Access Profile Rule
3
Complete the fields.
4
Click
Apply Changes
.
The rule is added to the access profile, and the device is updated.
Viewing the Profile Rules Table:
NOTE: The order in which rules appear in the Profile Rules Table is important. Packets are matched to
the first rule which meets the rule criteria.
1
Open the
Access Profiles
page
.
2
Click
Show All.
The
Profile Rules Table Page
opens:
To Next Page
Loading...
