Dell PowerConnect 5324 User Manual

94 Configuring System Information
www.dell.com | support.dell.com
Figure 6-22. SNTP Authentication
SNTP Authentication — Enables authenticating an SNTP session between the device and an
SNTP server, when enabled.
Encryption Key ID — Defines the Key Identification used to authenticate the SNTP server and
device. The field value is upto 4294967295 characters.
Authentication Key (1-8 Characters) — Specifies the key used for authentication.
Trusted Key — Specifies the Encryption Key used to authenticate the SNTP server.
Remove — Removes when .

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2