Dell PowerConnect 5324 User Manual

162 Configuring System Information
www.dell.com | support.dell.com
Defining Line Passwords
The Line Password page contains fields for defining line passwords for management methods. To
open the
Line Password page, click System → Management Security → Line Passwords in the tree
view.
Figure 6-62. Line Password
Line Password for Console/Telnet/Secure Telnet (0-159 Characters) — The line password for
accessing the device via a console, Telnet, or Secure Telnet session. Passwords can contain a
maximum of 159 characters.
Confirm Password — Confirms the new line password. The password appears in the ***** format.
Defining Line Passwords for Console Sessions
1 Open the Line Password page
2 Define the Line Password for Console field.
3 Click Apply Changes .
The line password for console sessions is defined, and the device is updated.
Defining Line Passwords for Telnet Sessions
1 Open the Line Password page.
2 Define the Line Password for Telnet field.
3 Click Apply Changes .

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2