Dell PowerConnect 5324 - SNTP Servers Table

Configuring System Information 99
Figure 6-27. SNTP Servers Table
Modifying an SNTP Server
1 Open the SNTP Servers page.
2 Click Show All.
The SNTP Servers Table opens.
3 Select an SNTP Server entry.
4 Modify the relevant fields.
5 Click Apply Changes .
The SNTP Server information is updated.
Deleting the SNTP Server
1 Open the SNTP Servers page.
2 Click Show All.
The SNTP Servers Table opens.
3 Select an SNTP Server entry.
4 Select the Remove check box.
5 Click Apply Changes .
The entry is removed, and the device is updated.