Dell PowerConnect 5324 - RMON History CLI Commands

Viewing Statistics 317
Modifying a History Control Table Entry
1 Open the RMON History Control page.
2 Select an entry in the History Entry No. field.
3 Modify the fields as required.
4 Click Apply Changes .
The table entry is modified, and the device is updated.
Deleting a History Control Table Entry
1 Open the RMON History Control page.
2 Select an entry in the History Entry No. field.
3 Click Remove .
4 Click Apply Changes .
The selected table entry is deleted, and the device is updated.
Viewing RMON History Control Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing GVRP statistics.
The following is an example of the CLI commands:
Table 8-85. RMON History CLI Commands
CLI Command Description
rmon collection history
index
[owner ownername | buckets
bucket-number] [interval seconds]
Enables and configures RMON on an
interface.
show rmon collection history
[ethernet interface | port-
channel port-channel-number]
Displays RMON collection history
statistics.
Console (config)# interface ethernet g8
Console (config-if)# rmon collection history 1 interval 2400
Console (config-if)# exit
Console (config)# exit