Dell PowerConnect 5324 - Select Authentication CLI Commands

Configuring System Information 157
Assigning Access Authentication Profiles or Sequences Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
Select Authentication
page.
The following is an example of the CLI commands:
Table 6-37. Select Authentication CLI Commands
CLI Command Description
enable authentication
[default | list-name]
Specifies the authentication method list when
accessing a higher privilege level from a remote
Telnet or console.
login authentication
[default | list-name]
Specifies the login authentication method list for
a remote Telnet or console.
ip http authentication
method1 [method2.]
Specifies authentication methods for HTTP
servers.
ip https authentication
method1 [method2.]
Specifies authentication methods for HTTPS
servers.
show authentication
methods
Displays information about the authentication
methods.