Dell PowerConnect 5324 - Page 156

156 Configuring System Information
www.dell.com | support.dell.com
TACACS+ — Authentication occurs at the TACACS+ server.
Applying an Authentication List to Console Sessions
1 Open the Select Authentication page.
2 Select an Authentication Profile in the Console field.
3 Click Apply Changes .
Console sessions are assigned an Authentication List.
Applying an Authentication Profile to Telnet Sessions
1 Open the Select Authentication page.
2 Select an Authentication Profile in the Telnet field.
3 Click Apply Changes .
Telnet sessions are assigned an Authentication List.
Applying an Authentication Profile to Secure Telnet (SSH) Sessions
1 Open the Select Authentication page.
2 Select an Authentication Profile in the Secure Telnet (SSH) field.
3 Click Apply Changes .
Secure Telnet (SSH) sessions are assigned an Authentication Profile.
Assigning HTTP Sessions an Authentication Sequence
1 Open the Select Authentication page.
2 Select an authentication sequence in the HTTP field.
3 Click Apply Changes .
HTTP sessions are assigned an authentication sequence.
Assigning Secure HTTP Sessions an Authentication Sequence
1 Open the Select Authentication page.
2 Select an authentication sequence in the Secure HTTP field.
3 Click Apply Changes .
Secure HTTP sessions are assigned an authentication sequence.