Configuring Device Information 227
Figure 7-93. Storm Control Settings Table
Configuring Storm Control with CLI Commands
The following table summarizes the equivalent CLI commands for configuring Storm Control as
displayed on the
Storm Control
page.
Table 7-55. Storm Control CLI Commands
CLI Command Description
port storm-control include-
multicast
Enables the device to count Multicast
packets together with broadcast packets.
port storm-control broadcast
enable
Enables broadcast storm control.
port storm-control broadcast rate
rate
Configures the maximum broadcast rate.
show ports storm-control [ethernet
interface]
Displays the storm control configuration.
To Next Page
Loading...
