Dell PowerConnect 5324 - GVRP Parameters

Configuring Device Information 271
The GVRP Global Parameters page enables GVRP globally. GVRP can also be enabled on a per-
interface basis. To open the
GVRP Parameters page, click Switch → VLAN → GVRP Parameters in
the tree view.
Figure 7-107. GVRP Parameters
GVRP Global Status — Enables or disables GVRP on the device. GVRP is disabled by default.
Interface — The port or LAG for which GVRP is enabled.
GVRP State — Enables or disables GVRP on an interface.
Dynamic VLAN Creation — Enables or disables VLAN creation through GVRP.
GVRP Registration — The GVRP Registration status.
Enabling GVRP on the Device
1 Open the GVRP Global Parameters page.
2 Select Enable in the GVRP Global Status field.
3 Click Apply Changes .
GVRP is enabled on the device.
Enabling VLAN Registration Through GVRP
1 Open the GVRP Global Parameters page.
2 Select Enable in the GVRP Global Status field for the desired interface.
3 Select Enable in the GVRP Registration field.
4 Click Apply Changes .