118 Configuring System Information
www.dell.com | support.dell.com
Working with Remote Server Logs Using the CLI Commands
The following table summarizes the equivqlent CLI command for working with remote server logs.
The following is an example of the CLI commands:
Table 6-25. Remote Log Server CLI Commands
CLI Command Description
logging (ip-address | hostname)
[port port] [severity level] [facility
facility] description text]
Logs messages to a remote server.
no logging Deletes a syslog server.
show logging Displays the state of logging and the syslog
messages.
console> enable
console# configure
console (config) # logging 10.1.1.1 severity critical
Console# show logging
Logging is enabled.
Console Logging: Level debug. Console Messages: 5 Dropped.
Buffer Logging: Level debug. Buffer Messages: 16 Logged, 16
Displayed, 200 Max.
File Logging: Level error. File Messages: 0 Logged, 209 Dropped.
SysLog server 31.1.1.2 Logging: error. Messages: 22 Dropped.
SysLog server 5.2.2.2 Logging: info. Messages: 0 Dropped.
SysLog server 10.2.2.2 Logging: critical. Messages: 21 Dropped.
SysLog server 10.1.1.1 Logging: critical. Messages: 0 Dropped.
1 messages were not logged
03-Mar-2004 12:02:03 :%LINK-I-Up: g1
03-Mar-2004 12:02:01 :%LINK-W-Down: g2
03-Mar-2004 12:02:01 :%LINK-I-Up: g3
To Next Page
Loading...
