Configuring System Information 193
The following is an example of the CLI commands:
Defining Advanced Settings
The the
Advanced Settings
page contains a link for configuring general settings. Use Advanced
Settings to set miscellaneous global attributes for the device. The changes to these attributes are
applied only after the device is reset. To open the
Advanced Settings
page, click
System
→
Advanced Settings
in the tree view.
Configuring General Device Tuning Parameters
The
General Settings
page provides information for defining general device parameters. To open
the
General Settings
page, click
System
→
Advanced Settings
→
General
in the tree view.
Console # copy tftp://172.16.101.101/file1 image
Accessing file 'file1' on 172.16.101.101.
Loading file1 from 172.16.101.101:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!! [OK]
Copy took 0:01:11 [hh:mm:ss]
Console# delete startup-config
Console# copy running-config startup-config
01-Jan-2000 01:55:03 %COPY-W-TRAP: The copy operation was
completed successfully
Copy succeeded