Configuring System Information 129
Configuring DNS Servers Using the CLI Commands
The following table summarizes the CLI commands for configuring device system information.
.
Table 6-29. DNS Server CLI Commands
CLI Command Description
ip name-server server-address Sets the available name servers. Up to eight name
servers can be set.
no ip name-server server-
address
Removes a name server.
ip domain-name name Defines a default domain name that the software
uses to complete unqualified host names.
clear host {name | *} Deletes entries from the host name-to-address
cache.
show hosts [name] Displays the default domain name, list of name
server hosts, the static and the cached list of host
names and addresses.
To Next Page
Loading...
