Dell PowerConnect 5324 User Manual

Configuring System Information 165
The following table summarizes the equivalent CLI commands for setting fields displayed in the
Modify Enable Password
page.
The following is an example of the CLI commands:
Defining TACACS+ Settings
The devices provide Terminal Access Controller Access Control System (TACACS+) client
support. TACACS+ provides centralized security for validation of users accessing the device.
TACACS+ provides a centralized user management system, while still retaining consistency with
RADIUS and other authentication processes. TACACS+ provides the following services:
•
Authentication — Provides authentication during login and via user names and user-defined
passwords.
•
Authorization — Performed at login. Once the authentication session is completed, an
authorization session starts using the authenticated user name. The TACACS server checks
the user privileges.
The TACACS+ protocol ensures network integrity through encrypted protocol exchanges between
the device and TACACS+ server. To open the
TACACS+ Settings page, click System →
Management Security
→ TACACS+ in the tree view.
Table 6-40. Modify Enable Password CLI Commands
CLI Command Description
enable password [level level]
password [encrypted]
Sets a local password to control access to user and
privilege levels.
show users accounts Displays information about the local user
database.
Console (config)# enable password level 15 secret
Console# show users accounts
Username Privilege
--------- ---------
secret 15

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2