50 Starting and Configuring the Device
www.dell.com | support.dell.com
Verifying the IP and Default Gateway Addresses
Ensure that the IP address and the default gateway are properly assigned by executing the following
command and examining its output:
Command
console# show ip interface vlan 1
Output
NOTE: It is recommended that the most recent revision of the user documentation is downloaded from
the Dell support website at support.dell.com.
User Name
To manage the device remotely, for example through SSH, Telnet, or the Web interface, a user
name must be configured. To gain complete administrative control over the device the highest
priviledge (15) must be specified.
NOTE: Only the administrator (super-user) with the highest priviledge level (15) is allowed to manage the
device through the Web browser interface.
For more information about the privilege level, see the "CLI Reference Guide".
The configured user name is entered as a login name for remote management sessions. To
configure user name and privilege level, enter the command at the system prompt as shown in the
configuration example:
console> enable
console# configure
console(config)# username admin password abc level 15
Gateway IP Address Activity status
--------------------- ------------------
192.168.1.1 Active
IP address Interface Type
------------------- ------------ ------------
192.168.1.123 /24 VLAN 1 Static
To Next Page
Loading...
