Dell PowerConnect 5324 User Manual

Configuring System Information 191
2 Define the file type to upload.
3 Define the fields.
4 Click Apply Changes .
The software is uploaded to the device.
Uploading Files Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
File Upload to Server
page.
Copying Files
Files can be copied and deleted from the Copy Files page. To open the Copy Files page, click
System → File Management → Copy Files in the tree view.
Figure 6-78. Copy Files
Copy Configuration — When selected, copies either the Running Configuration, Startup
Configuration or Backup Configuration files. The possible field values are:
Table 6-46. File Upload CLI Commands
CLI Command Description
copy source-url destination-
url [snmp]
Copies any file from a source to a destination.

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2