Dell PowerConnect 5324 User Manual

Configuring System Information 85
Viewing System Health Information
The System Health page shows physical device hardware information. To open the System Health
page, click
System → General → Health in the tree view.
Figure 6-18. System Health
Power Supply Status — The main power supply state. The possible field values are:
— The main power supply is operating normally for the specified unit.
— The main power supply is not operating normally for the specified unit.
Not Present — The power supply is not present for the specified unit.
Fan — The device fan status. The possible field values are:
— The fans are operating normally for the specified unit.
— The fans are not operating normally for the specified unit.
Not Present — The fans are not present for the specified unit.

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2