Viewing Statistics 333
Viewing LAG Statistics Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing LAG statistics.
Table 8-91. LAG Statistic CLI Commands
CLI Command Description
show interfaces counters [ethernet
interface | port-channel port-channel-
number]
Displays traffic seen by the physical
interface.
show rmon statistics {ethernet interface |
port-channel port-channel-number}
Displays RMON Ethernet
statistics.
show gvrp statistics {ethernet interface |
port-channel port-channel-number}
Displays GVRP statistics.
show gvrp error-statistics {ethernet
interface | port-channel port-channel-
number}
Displays GVRP error statistics.
Console# show gvrp statistics
GVRP statistics:
----------------
rJE : Join Empty Received rJIn : Join In Received
rEmp : Empty Received rLIn : Leave In Received
rLE : Leave Empty Received rLA : Leave All Received
sJE : Join Empty Sent sJIn : Join In Sent
sEmp : Empty Sent sLIn : Leave In Sent
sLE : Leave Empty Sent sLA : Leave All Sent
Port rJE rJIn rEmp rLIn rLE rLA sJE sJIn sEmp sLIn sLE sLA
---- --- ---- ---- ---- --- --- --- ---- ---- ---- --- ---
g1 0 0 0 0 0 0 0 0 0 0 0 0
To Next Page
Loading...
