Dell PowerConnect 5324 User Manual

Viewing Statistics 321
Defining Device RMON Events
The RMON Events Control page contains fields for defining RMON events. To open the RMON
Events Control
page, click Statistics/RMON → RMON → Events Control in the tree view.
Figure 8-124. RMON Events Control
Event Entry — The event.
Community — Community to which the event belongs.
Description — User-defined event description.
Ty p e — Describes the event type. Possible values are:
Log — Event type is a log entry.
Trap — Event type is a trap.
Log and Trap — Event type is both a log entry and a trap.
None — There is no event.
Time —
Owner — The device or user that defined the event.
Remove — When selected, removes the event from the RMON Events Table .
Adding an RMON Event
1 Open the RMON Events Control page.
2 Click Add .

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2