Configuring System Information 115
Configuring the Remote Log Server Settings Page
The
Remote Log Server Settings
page contains fields for viewing and configuring the available Log
Servers. In addition, new log servers can be defined, and the log severity sent to each sever. To open
the
Remote Log Server Settings
page, click
System
→
Logs
→
Remote Log Server
in the tree view.
Figure 6-32. Remote Log Server Settings
Available Servers
— Contains a list of servers to which logs can be sent.
UDP Port (1-65535)
— The UDP port to which the logs are sent for the selected server. The
possible range is 1 - 65535. The default value is 514.
Facility
— Defines a user-defined application from which system logs are sent to the remote server.
Only one facility can be assigned to a single server. If a second facility level is assigned, the first
facility level is overridden. All applications defined for a device utilize the same facility on a server.
The possible field values are:
Local 0 - Local 7.
To Next Page
Loading...
